PCIe To M.2 Adapter for Raspberry Pi 5
Compatible with 2280 / 2260 / 2242 / 2230 size NVMe Protocol M.2 SSD, 8Gbps Data Rate, High-speed Reading/Writing, Raspberry Pi 5 NVMe.
د.ع20,000
In stock
Waveshare PCIe To M.2 Adapter Board (D) for Raspberry Pi 5, Compatible with 2280 / 2260 / 2242 / 2230 size NVMe Protocol M.2 SSD, Raspberry Pi 5 NVMe
Adapter For NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing, Improves Working Efficiency.
NVMe Solid State Drives Support:
Compatible With 2280 / 2260 / 2242 / 2230 Size M.2 Solid State Drives
Supports Gen2 And Gen3 Modes, Supports Booting PI5 From Solid State Drive
Improves reading/writing speed of your Pi:
Faster reading/writing speed compared to the TF card slot of Raspberry Pi , greatly improving reading/writing efficiency of the system or files, Supports booting Pi5 from NVME Solid State Drive.
Two Power Supply Methods:
Supports Power Supply Via PCIe Cable Or 3PIN Cable
Note: uses PCIe cable for power supply by default, you can add 3PIN cable in cases of insufficient power.
Overview
This PCIe TO M.2 M key board is designed for Raspberry Pi 5, compatible with 2230/2242/2260/2280 size M.2 solid state drive, supports Gen2 and Gen3 modes, supports booting PI5 from solid state drive (SSD).
Features
- Support NVMe protocol M.2 interface solid state drive protocol, high-speed write/read, higher working efficiency.
- Support PCI-E×1 Gen2 or Gen3 mode.
- Only support PI5.
- Compatible with 2230/2242/2260/2280 size M.2 solid state drive.
- Onboard working indicator, light-up when powering on, and the ACT status indicator keeps blinking while writing/reading.
Note
- The 3-pin cable is not required by default. The PCIe cable provides 5W of power; only connect the 3-pin cable if the device’s power consumption exceeds this.
